Tasks

Edit This Page

Accessing Clusters

This topic discusses multiple ways to interact with clusters.

Accessing for the first time with kubectl

When accessing the Kubernetes API for the first time, we suggest using the Kubernetes CLI, kubectl.

To access a cluster, you need to know the location of the cluster and have credentials to access it. Typically, this is automatically set-up when you work through a Getting started guide, or someone else setup the cluster and provided you with credentials and a location.

Check the location and credentials that kubectl knows about with this command:

kubectl config view

Many of the examples provide an introduction to using kubectl and complete documentation is found in the kubectl manual.

Directly accessing the REST API

Kubectl handles locating and authenticating to the apiserver. If you want to directly access the REST API with an http client like curl or wget, or a browser, there are several ways to locate and authenticate:

Using kubectl proxy

The following command runs kubectl in a mode where it acts as a reverse proxy. It handles locating the apiserver and authenticating. Run it like this:

kubectl proxy --port=8080

See kubectl proxy for more details.

Then you can explore the API with curl, wget, or a browser, replacing localhost with [::1] for IPv6, like so:

curl http://localhost:8080/api/

The output is similar to this:

{
  "versions": [
    "v1"
  ]
}

Without kubectl proxy

Use kubectl describe secret... to get the token for the default service account with grep/cut:

APISERVER=$(kubectl config view --minify | grep server | cut -f 2- -d ":" | tr -d " ")
SECRET_NAME=$(kubectl get secrets | grep ^default | cut -f1 -d ' ')
TOKEN=$(kubectl describe secret $SECRET_NAME | grep -E '^token' | cut -f2 -d':' | tr -d " ")

curl $APISERVER/api --header "Authorization: Bearer $TOKEN" --insecure

The output is similar to this:

{
  "kind": "APIVersions",
  "versions": [
    "v1"
  ],
  "serverAddressByClientCIDRs": [
    {
      "clientCIDR": "0.0.0.0/0",
      "serverAddress": "10.0.1.149:443"
    }
  ]
}

Using jsonpath:

APISERVER=$(kubectl config view --minify -o jsonpath='{.clusters[0].cluster.server}')
SECRET_NAME=$(kubectl get serviceaccount default -o jsonpath='{.secrets[0].name}')
TOKEN=$(kubectl get secret $SECRET_NAME -o jsonpath='{.data.token}' | base64 --decode)

curl $APISERVER/api --header "Authorization: Bearer $TOKEN" --insecure

The output is similar to this:

{
  "kind": "APIVersions",
  "versions": [
    "v1"
  ],
  "serverAddressByClientCIDRs": [
    {
      "clientCIDR": "0.0.0.0/0",
      "serverAddress": "10.0.1.149:443"
    }
  ]
}

The above examples use the --insecure flag. This leaves it subject to MITM attacks. When kubectl accesses the cluster it uses a stored root certificate and client certificates to access the server. (These are installed in the ~/.kube directory). Since cluster certificates are typically self-signed, it may take special configuration to get your http client to use root certificate.

On some clusters, the apiserver does not require authentication; it may serve on localhost, or be protected by a firewall. There is not a standard for this. Configuring Access to the API describes how a cluster admin can configure this. Such approaches may conflict with future high-availability support.

Programmatic access to the API

Kubernetes officially supports Go and Python client libraries.

Go client

The Go client can use the same kubeconfig file as the kubectl CLI does to locate and authenticate to the apiserver. See this example.

If the application is deployed as a Pod in the cluster, please refer to the next section.

Python client

To use Python client, run the following command: pip install kubernetes. See Python Client Library page for more installation options.

The Python client can use the same kubeconfig file as the kubectl CLI does to locate and authenticate to the apiserver. See this example.

Other languages

There are client libraries for accessing the API from other languages. See documentation for other libraries for how they authenticate.

Accessing the API from a Pod

When accessing the API from a pod, locating and authenticating to the apiserver are somewhat different.

The recommended way to locate the apiserver within the pod is with the kubernetes.default.svc DNS name, which resolves to a Service IP which in turn will be routed to an apiserver.

The recommended way to authenticate to the apiserver is with a service account credential. By kube-system, a pod is associated with a service account, and a credential (token) for that service account is placed into the filesystem tree of each container in that pod, at /var/run/secrets/kubernetes.io/serviceaccount/token.

If available, a certificate bundle is placed into the filesystem tree of each container at /var/run/secrets/kubernetes.io/serviceaccount/ca.crt, and should be used to verify the serving certificate of the apiserver.

Finally, the default namespace to be used for namespaced API operations is placed in a file at /var/run/secrets/kubernetes.io/serviceaccount/namespace in each container.

From within a pod the recommended ways to connect to API are:

In each case, the credentials of the pod are used to communicate securely with the apiserver.

Accessing services running on the cluster

The previous section was about connecting the Kubernetes API server. This section is about connecting to other services running on Kubernetes cluster. In Kubernetes, the nodes, pods and services all have their own IPs. In many cases, the node IPs, pod IPs, and some service IPs on a cluster will not be routable, so they will not be reachable from a machine outside the cluster, such as your desktop machine.

Ways to connect

You have several options for connecting to nodes, pods and services from outside the cluster:

Discovering builtin services

Typically, there are several services which are started on a cluster by kube-system. Get a list of these with the kubectl cluster-info command:

kubectl cluster-info

The output is similar to this:

Kubernetes master is running at https://104.197.5.247
elasticsearch-logging is running at https://104.197.5.247/api/v1/namespaces/kube-system/services/elasticsearch-logging/proxy
kibana-logging is running at https://104.197.5.247/api/v1/namespaces/kube-system/services/kibana-logging/proxy
kube-dns is running at https://104.197.5.247/api/v1/namespaces/kube-system/services/kube-dns/proxy
grafana is running at https://104.197.5.247/api/v1/namespaces/kube-system/services/monitoring-grafana/proxy
heapster is running at https://104.197.5.247/api/v1/namespaces/kube-system/services/monitoring-heapster/proxy

This shows the proxy-verb URL for accessing each service. For example, this cluster has cluster-level logging enabled (using Elasticsearch), which can be reached at https://104.197.5.247/api/v1/namespaces/kube-system/services/elasticsearch-logging/proxy/ if suitable credentials are passed. Logging can also be reached through a kubectl proxy, for example at: http://localhost:8080/api/v1/namespaces/kube-system/services/elasticsearch-logging/proxy/. (See above for how to pass credentials or use kubectl proxy.)

Manually constructing apiserver proxy URLs

As mentioned above, you use the kubectl cluster-info command to retrieve the service’s proxy URL. To create proxy URLs that include service endpoints, suffixes, and parameters, you simply append to the service’s proxy URL: http://kubernetes_master_address/api/v1/namespaces/namespace_name/services/service_name[:port_name]/proxy

If you haven’t specified a name for your port, you don’t have to specify port_name in the URL.

By default, the API server proxies to your service using http. To use https, prefix the service name with https:: http://kubernetes_master_address/api/v1/namespaces/namespace_name/services/https:service_name:[port_name]/proxy

The supported formats for the name segment of the URL are:

Examples
{
  "cluster_name" : "kubernetes_logging",
  "status" : "yellow",
  "timed_out" : false,
  "number_of_nodes" : 1,
  "number_of_data_nodes" : 1,
  "active_primary_shards" : 5,
  "active_shards" : 5,
  "relocating_shards" : 0,
  "initializing_shards" : 0,
  "unassigned_shards" : 5
}

Using web browsers to access services running on the cluster

You may be able to put an apiserver proxy url into the address bar of a browser. However:

Requesting redirects

The redirect capabilities have been deprecated and removed. Please use a proxy (see below) instead.

So Many Proxies

There are several different proxies you may encounter when using Kubernetes:

  1. The kubectl proxy:

    • runs on a user’s desktop or in a pod
    • proxies from a localhost address to the Kubernetes apiserver
    • client to proxy uses HTTP
    • proxy to apiserver uses HTTPS
    • locates apiserver
    • adds authentication headers
  2. The apiserver proxy:

    • is a bastion built into the apiserver
    • connects a user outside of the cluster to cluster IPs which otherwise might not be reachable
    • runs in the apiserver processes
    • client to proxy uses HTTPS (or http if apiserver so configured)
    • proxy to target may use HTTP or HTTPS as chosen by proxy using available information
    • can be used to reach a Node, Pod, or Service
    • does load balancing when used to reach a Service
  3. The kube proxy:

    • runs on each node
    • proxies UDP and TCP
    • does not understand HTTP
    • provides load balancing
    • is just used to reach services
  4. A Proxy/Load-balancer in front of apiserver(s):

    • existence and implementation varies from cluster to cluster (e.g. nginx)
    • sits between all clients and one or more apiservers
    • acts as load balancer if there are several apiservers.
  5. Cloud Load Balancers on external services:

    • are provided by some cloud providers (e.g. AWS ELB, Google Cloud Load Balancer)
    • are created automatically when the Kubernetes service has type LoadBalancer
    • use UDP/TCP only
    • implementation varies by cloud provider.

Kubernetes users will typically not need to worry about anything other than the first two types. The cluster admin will typically ensure that the latter types are setup correctly.

Feedback